Product Description
Hyundai HYMMA-120 Inverter Welder 120Amp MMA/ARC 230V Single Phase
The HYMMA-120 is a lightweight and incredibly versatile single phase ARC / MMA welder from Hyundai. The HYMMA-120 is capable of welding mild steel up to 6mm.
Lightweight Portable ARC Welder
Weighing only 6.0kg, the HYMMA-120 is easy to carry around thanks to its adjustable harness and lightweight pressed steel case with powder coated finish for extra corrosion resistance. Accessories include electrode holder with 2m cable, earth clamp with 1.5m cable, chipping hammer and wire brush making the HYMMA-120 extremely cost effective.
Adjustable ARC Welder For Multiple Materials And Thicknesses
The HYMMA-120 ARC welder features a stepless regulator for infinite variable control of the welding current with a low current facility for effective welding of thinner materials. The welding (output) current of the HYMMA-120 can be regulated within the range of 20-120 Ampere making the HYMMA-120 adjustable to suit welding different materials and thicknesses of steel.
High Duty Cycle Welder
Beware of lower quality models by always checking the ‘Duty Cycle’. Duty cycle is the amount of time, within a 10 minute period the welder can be used, on a given output. For example, our 120A welder has a duty cycle of 35% when used on 120A output. This means it can be used for three and a half minutes in every 10 minute period.
Duty cycles for the Hyundai welder range shown below:
Model Output Amperage / Duty Cycle / Period of use within 10 minute period
MMA120 70A / 100% / 10minutes 90A / 50% / 6minutes 120A / 35% / 3.5minutes
MMA160 95A / 100% / 10minutes 120A / 50% / 6minutes 160A / 35% / 3.5minutes
MMA200P 155A / 100% / 10minutes 200A / 60% / 6minutes
TIG200 155A / 100% / 10minutes 200A / 60% / 6minutes
Mig180 105A / 100% / 10minutes 140A / 60% / 6minutes 180A / 35% / 3.5minutes
Cheaper, lower quality welders claim to be a certain Amperage output, but can have a very low duty cycle on the output they have claimed. Always check the duty cycle to ensure you are getting the best value for money.
Adavtages Of An Inverter Welder
The inverter technology used within the Hyundai welders has certain advantages compared to more traditional transformer welders. The inverter type welders are usually lighter, more cost effective and usually require less input power for a comparable output. This makes them more cost effective not only to purchase, but also to run.
Safe And Versatile
Fitted with thermal overload protection to ensure maximum durability. Suitable for welding steel, stainless steel, copper, nickel, titanium and their alloys.
Suitable for fabricators, farmers, home mechanics, mobile technicians and DIY enthusiasts the HYMMA-120 is a good all rounder for welding with rods up to 3.2mm. The HYMMA-120 features high frequency starts allowing for smooth arc strikes.
Low Service And Maintenance
With low service and maintenance requirements, the HYMMA-120 is incredibly easy to use and maintain, and has full Hyundai UK parts back up.
(TIG) Tungsten Inert Gas - Tungsten Inert Gas Welding (TIG) or (GTAW) Gas Tungsten Arc Welding is an arc welding process that uses a non-consumable tungsten electrode to produce the weld.
(MIG) Metal Inert Gas - Metal Inert Gas Welding (MIG), (GMAW) Gas Metal Arc Welding or (MAG) Metal Active Gas is a welding process in which an electric arc forms between a consumable wire electrode and the workpiece metal(s), which heats the workpiece metal(s), causing them to melt and join.
Warranty
Hyundai 2 year platinum warranty.
Key Features
Fitted with UK 13A fused plug
Variable DC output 20Amp to 120Amp MMA / ARC Welder
Electrode sizes 1mm to 3.2mm
Duty cycle of 70A / 100% / 10minutes, 120A / 35% / 3.5minutes
Fitted with thermal overload protection, anti-stick and hot start functions
Single Phase 230v ARC / MMA Welder
Welding rod holder, earth clamp and cables
Great welder for mechanics, mobile technicians, farmers and DIY enthusiasts
Covered by a Hyundai 2 year platinum warranty.
Full UK service and parts operation to maintain your welder for years to come.
In The Box:
Electrode holder with 2m cable
Earth clamp with 1.5m cable
Chipping hammer
Wire brush
Know your welder:
(MMA) Manual Metal Arc - Manual Metal Arc Welding (MMA) or (MMAW) Manual Metal Arc Welding is flux shielded arc welding or informally as stick welding, is a manual arc welding process that uses a consumable electrode covered with a flux to lay the weld.
Specifications
AC Frequency 50
Current @ 60% (A) 90
Dimensions (H x W x L) (mm) 355 x 230 x 320
Duty Cycle (%) Under 40ºC 35% @ 120A
Efficiency (%) 83
Input Voltage (V) 230
Max Input (kVA) 4.8
Model HYMMA-120 Inverter MMA / ARC Welder
Net Weight (kg) 6.0
No-Load Voltage (V) 65
Output Current (A) 120
Power Factor (Cosf) 0.7
Rated Output Range (Amps) 20 - 120
Usable Electrode (mm) 1.0 - 3.2
Reviews
Customer Reviews
Be the first to write a review...
