Product Description
Oleo-Mac BCH 400T 40cc Tap&Go Petrol Brush Cutter The air-cooled two-stroke motor on the Oleo-Mac BCH 400T Petrol Brushcutter has an efficient 40cc displacement and combines a fuel-primer with a manual choke – with half-throttle setting – to ensure getting started is a fast, stress-free process.
Designed and built with operational reliability to the fore, the engine benefits from a nickel-plated cylinder sleeve, a two-ring piston and a forged steel connector rod. A bearing-mounted drive-shaft further enhances long-term reliability by providing resistance to long periods of constant high-RPM use.
Key technical features of the BCH 400 T include a three-piece crankshaft, a two-segment elastic piston, a rigid 8 mm steel drive shaft mounted on six self-lubricating plain bearings, and an anti-vibration system for comfortable operation.
In addition to a twin-line strimmer head, the Oleo-Mac BCH 400T comes with a three-tooth metal brush blade that can be fitted if you’re faced with particularly dense, well-established growth. The line-head features a Tap & Go mechanism, so new cord can be fed-out without leaving your working-position..
Oleo-Mac BCH 400T 40cc Tap&Go Petrol Brush Cutter
2.0 HP - 1.5 kW/40.2 cm³ 2-stroke engine featuring generous torque output with a linear power curve even at low revs
EasyStart - System that offers the same advantages as the EasyOn system but with the addition of reduced kickback
AlwaysOn- On/off switch automatically returns to the "on" position after each stop, thus eliminating the risk of flooding the carburettor.
Graphic representation of starting operations facilitates engine starting even for less expert users
Choke lever integral with half-throttle setting for fast and easy starting
Tap&Go EVO line head
Three-tooth brushcutter blade
Built-in anti-vibration system greatly reduces the level of vibration experienced by the operator during use of the tool
Warranty 3 years
Oleo-Mac BCH 400T 40cc Tap&Go Petrol Brush Cutter
Power/Displacement: 2.0 HP - 1.5 kW/40.2 cm³
Cutting components: 130 mm dia. Tap&Go EVO line head with 2.40 mm line - 255 mm dia. disc with 3 blades
Grip: handlebar
Tube diameter: 28 mm
Fuel tank capacity: 0.86 L
Harness: double
Sound pressure/power level: 95.4/113 dB(A)
Lh/rh vibration level: 4.5/5.7 m/s²
Dry weight without cutting tools: 8.1 kg (40 T) - 8.2 kg (400 T)
Complete single item weight including packaging: 12,3 kg
Warranty 3 years
Reviews
Customer Reviews
Be the first to write a review...
